ETS-Lindgren 3301C Active Monopole - Manual (Page 40)

A LARM DIP S WITCHES
When you turn on the Model 3301C, the saturation and power lights
will blink and an audible alarm will sound for five to eight seconds.
The Model 3301C is shipped with all active alarm DIP switches set to ON. To
change DIP switch settings to disable the beep, see the steps on page 41.
A bank of four DIP switches
located at the SW1
designation on the system
board slide to control the
audible settings for the
saturation and power
alarms.
Saturation Alarm— Audible alarm for saturation condition
Not Used— Inactive
Battery Low Alarm (Constant)— Continuous audible alarm for
power/battery low condition
Battery Low Alarm (Intermittent)— Intermittent audible alarm for
power/battery low condition
40 | Operation