Electric Eel RF - Manual (Page 10)

Model RF Manual (082610)_2-ColorREV.doc Page 10 of 16
CABLE INSTALLATION
DANGER: Exercise caution when
removing cables from the package.
Wound cables are under tension and
may spring apart in a dangerous
manner and cause injury.
1. Disconnect power cord before
any set up or maintenance is
attempted.
2. Unpack cable and uncoil by
laying it out flat in an open area.
3. Turn cable tension knob
counterclockwise to allow cable
to be inserted through the
feeder and into the cage. (See
Figure #6)
Figure 6
4. Bring cable end out the side of
the cage and attach cable
anchor. (See Figures #7 and #8)
Figure 7
Figure 8
Cable
Anchor
Female
Fitting
Cable
Tension
Knob