EFCO 5XP Series - Manual (Page 34)

EFCO CORPORATION 2/8/2013 PART NO. YW43 Page 34 of 34
5XP SLIDING GLASS DOOR INSTALLATION INSTRUCTIONS
19. Screen Installation instruction
When hanging the screens, make note that
the rollers are at the head. Both the screen head
and screen sill will need to engage at the same time.
The screen should now roll freely on the track.
Locate two (HNE4 or HNE5) anti-lift pieces. Each
piece will be attached with two SFZ8 (#8-15 x 1/2"
FH SMS 18-8 A pt.) screws. Attach the anti-lift
pieces to the existing holes in the screen head.
Fastening the anti-lift pieces will prevent the screen
from coming off the roller track. (See Fig. 20)
Locate (14H4) screen stops. One is required.
Dab a little silicone on the stop where
it will come in contact with the fixed jamb.
Drive the stop on tight against the head.
(See Fig. 21)
HNE4 or HNE5 anti-lift piece
14H4 screen stop
Fig. 20
Fig. 21