EFCO 5XP Series - Manual (Page 22)

EFCO CORPORATION 6/8/2012 PART NO. YW43 Page 22 of 34
5XP SLIDING GLASS DOOR INSTALLATION INSTRUCTIONS
9. The fixed panel side rail has an indention mark running vertically along its full length (See
Fig. 4). This indention mark, located on the inside, will need to line up with the leading
edge of the fixed jamb. Slide the panel and align. This is to allow the fixed panel interlock rail
to be in proper alignment with the operable panel meeting rail. This alignment will make
the leading edge of the operable panel locking rail engage the operable jamb
properly.
Indention mark
Alignment
Fixed Panel
EXTERIOR
Fig.3
Fig.4