EFCO E-Lite User Manual
Page 6

EFCO CORPORATION 6/2012 PART NO. YWLS
Page 6 of 19
E-Lite Fabrication, Assembly and Installation Instructions
Section III: E-Lite “Stick Built” Internal Support Channel Assembly
#13D8
#13D9
±
1. Fabricate and Install Internal Support Channel.
A.) The internal support channel must be cut to length (nominally 4” less than strut centerline to centerline dimension).
Locate and drill all attachment holes in the support channel. (Typically the same anchor screw is used at the
internal channel support as used to anchor the channel base.)
B.) Align drill a clear hole in the channel base and a pilot hole in the horizontal mullion. (This is recommended even if
self drilling screws are used to avoid binding or breaking of the screw.)
C.) Install internal support channel equally spaced between the support struts. Tighten attachment screws firmly.
Support Strut
Support Channel
Framing system or wall substrate
Support Channel
Support Strut
Framing system or wall substrate
Channel Base
- Windows Hung General Maintenance Instructions (19 pages)
- Windows Hung Understanding Condensation (6 pages)
- Windows Hung Installation (58 pages)
- E-Shade (41 pages)
- 2 1/2" Center Tongue Sun Shade Clip (19 pages)
- S5500 Advanced (46 pages)
- S5500 Inside Glazed (48 pages)
- S5500 Outside Glazed (48 pages)
- S5500 Router & Jig (6 pages)
- S5500 SSG Captured (81 pages)
- S5500 SSG (53 pages)
- S5600 Concealed Vent (13 pages)
- S5600 Inside Glazed (29 pages)
- S5600 Outside Glazed (26 pages)
- S5600 Slope Glazed (23 pages)
- S5600 Structural Glazed (28 pages)
- S5900 Inside Glazed (18 pages)
- S5900 Outside Glazed (16 pages)
- S5900 Structural Glazed (23 pages)
- 5500X Outside Glazed (60 pages)
- Duracast Pressure Plate (12 pages)
- 5800 Series (20 pages)
- 8700 Series Assembly Instructions Vol.1 (35 pages)
- 8700 Series Assembly Instructions Vol.2 (34 pages)
- 8700 Series Assembly Instructions Vol.3 (28 pages)
- 8700 Series Assembly Instructions Vol.4 (44 pages)
- 8700 Series Assembly Instructions Vol.5 (89 pages)
- 8700 Series Assembly Instructions Vol.6 (16 pages)
- 8700 Installation Instructions (68 pages)
- 8750XD (43 pages)
- 875X Wall Vent (31 pages)
- 401 Series Roto Vent for Storefront (14 pages)
- 401 Series Storefront (94 pages)
- 406 (T) Series (41 pages)
- 433 Series (90 pages)
- 525 Series (45 pages)
- 526 Series (50 pages)
- 960 Series (65 pages)
- WV410 (21 pages)
- 403X Series (29 pages)
- 406X Series (25 pages)
- 945 Series (50 pages)
- 955 Series (45 pages)
- 901 Series (52 pages)