EFCO E-Lite User Manual
Page 19

EFCO CORPORATION 6/2012 PART NO. YWLS
Page 19 of 19
E-Lite Fabrication, Assembly and Installation Instructions
Section XIII: E-Lite Module Alignment Clips Installation
Alignment Clip
Alignment Clip TEK Screws
1.) Attach Alignment Clip.
A.) Locate the alignment clips at the nominal 1/8” module gaps. The clips are designed
to bridge the gap and clear all of the module frame assembly screws.
B.) Attach the clip with the Tek screws supplied. One (1) screw for each of the fixed holes
first and one (1) screw in the approximate center of the adjacent slotted hole into the
next light shelf module. It is expected that some minor alignment / adjustments will be
needed before the clip is firmly seated, and then the screws are tightened.
C.) See SECTION VI for the Face Cap Attachment and SECTION VII for the End Cap Attachment.
- Windows Hung General Maintenance Instructions (19 pages)
- Windows Hung Understanding Condensation (6 pages)
- Windows Hung Installation (58 pages)
- E-Shade (41 pages)
- 2 1/2" Center Tongue Sun Shade Clip (19 pages)
- S5500 Advanced (46 pages)
- S5500 Inside Glazed (48 pages)
- S5500 Outside Glazed (48 pages)
- S5500 Router & Jig (6 pages)
- S5500 SSG Captured (81 pages)
- S5500 SSG (53 pages)
- S5600 Concealed Vent (13 pages)
- S5600 Inside Glazed (29 pages)
- S5600 Outside Glazed (26 pages)
- S5600 Slope Glazed (23 pages)
- S5600 Structural Glazed (28 pages)
- S5900 Inside Glazed (18 pages)
- S5900 Outside Glazed (16 pages)
- S5900 Structural Glazed (23 pages)
- 5500X Outside Glazed (60 pages)
- Duracast Pressure Plate (12 pages)
- 5800 Series (20 pages)
- 8700 Series Assembly Instructions Vol.1 (35 pages)
- 8700 Series Assembly Instructions Vol.2 (34 pages)
- 8700 Series Assembly Instructions Vol.3 (28 pages)
- 8700 Series Assembly Instructions Vol.4 (44 pages)
- 8700 Series Assembly Instructions Vol.5 (89 pages)
- 8700 Series Assembly Instructions Vol.6 (16 pages)
- 8700 Installation Instructions (68 pages)
- 8750XD (43 pages)
- 875X Wall Vent (31 pages)
- 401 Series Roto Vent for Storefront (14 pages)
- 401 Series Storefront (94 pages)
- 406 (T) Series (41 pages)
- 433 Series (90 pages)
- 525 Series (45 pages)
- 526 Series (50 pages)
- 960 Series (65 pages)
- WV410 (21 pages)
- 403X Series (29 pages)
- 406X Series (25 pages)
- 945 Series (50 pages)
- 955 Series (45 pages)
- 901 Series (52 pages)