Dynojet Proportional Air Brake - Manual (Page 8)

Proportional Air Brake Installation Guide
P R O P O R T I O N A L A I R B R A K E
Installation
4
I NSTALLING THE P ROPORTIONAL A IR B RAKE S YSTEM
1 Install the DIN rail.
1a
Clamp the DIN rail to the right post 14-inches down from the top of the
dyno frame.
1b Using a center punch, mark two mounting holes in the middle of the top
and bottom slots. Remove the clamp and rail.
1c Drill and tap the mounting holes for 1/4-inch UNC bolts.
1d Secure the DIN rail to the dyno using two 1/4-inch button-head allen bolts.
2 Hook one side of the EPR on the DIN rail then rotate it toward the DIN rail until it
snaps into place.
Figure 3: Install the DIN Rail and EPR
14 in.
DIN rail
EPR
post
install the DIN rail install the EPR
top of dyno
frame