Dynojet Optical RPM Sensor - Manual (Page 7)

Optical RPM Sensor Installation Guide
1-1
C
H A P T E R
1
O
PTICAL
RPM S
ENSOR
I
NSTALLATION
This document provides instructions for installing the Optical RPM Sensor. To ensure
safety and accuracy in the procedures, perform the procedures as they are described.
This manual will walk you through the installation procedures, running WinPEP and
using the tachometer to verify proper function, and describe how to make any
necessary adjustments.
Document Part Number: 98295109
Last Updated: 07-25-01
CONVENTIONS USED IN THIS MANUAL
The conventions used in this manual are designed to aid the user and protect both
the user and the equipment.
example of convention description
Bold Highlights items you can select on in the software
interface, including buttons and menus.
Indicates a keyboard command. For example, “press
U ” means “using the keyboard, press the letter U.”
The Caution icon indicates a potential hazard to the
dynamometer equipment. Follow all procedures
exactly as they are described and use care when
performing all procedures.
The Warning icon indicates potential harm to the
person performing a procedure and/or the
dynamometer equipment.