Code 3 vLink - Manual (Page 26)

26
Technical Specifications:
Unit Weight: .84 lbs (.38 kg)
Packaged Weight: ~1.6 lbs (.8 kg)
Input Voltage: 10 to 16VDC
Operating Current: <.14 A @ 13.8VDC*
Approvals: FCC (USA), IC (Canada), ETSI (Europe) Certified
Inputs: 8**
Input Control Current: <.01A @ 13.8VDC nominal
Outputs: 8**
Output Current: 5A Max per output (30A combined total all outputs)
Dimensions:
*Excluding output load current for Universal Output version
**Universal Output version only
***Route the red 10AWG wire to a high current +12VDC power source. You may extend this wire by splicing a longer section of like wire as
necessary. It’s very important that this wire be protected by a user supplied fuse installed near the +12VDC source. The fuse rating should be
about 125% of the total current for all outputs combined but must not exceed 30A.