Code 3 Sprinter User Manual
Page 7

This siren system is CA T13 compliant when configured properly. Limitation of siren tones available to the end user are
password protected to insure CA T13 compliance.
(Lighting Control keys are found on the light grey pad. Auditory Control keys are found on the blue pad in the center of the Controller.)
Primary light controls (play recorded message)
Take Down lights (recorded message repeat)
Hi Lo siren #2 (flash rate program)
Standard Wail and Yelp siren tones (back light program)
Enable quick selection of lights and siren
Secondary
lights
Bargraph
display
left alley
(vol up prgrm)
program select
Clear all selections
and record stop
sign light , (message record)
Manual siren key (siren volume select prgm)
right alley
(vol down prgrm)
Radio rebroadcast - PA (program function key)
7
IMPORTANT WARNINGS TO USERS OF SIRENS: “Wail” and “Yelp” tones are in some cases (such
as the state of California) the only recognized siren tones for calling for the right of way. Ancillary
tones such as “Air Horn”, “Hi-Lo”, “Hyper Yelp”, and “Hyper Lo” in some cases do not provide as high
a sound pressure level. It is recommended that these tones be used in a secondary mode to alert
motorists to the presence of multiple emergency vehicles or to the momentary shift from the primary
tone as an indication of the imminent presence of any emergency vehicle.
Figure 2 - Controller Functions