beautypg.com

Warranty, Product returns – Code 3 RockerPak 410, 416, 426 User Manual

Page 20

background image

Public Safety Equipment, Inc.

10986 N. Warson Road

St. Louis, Missouri 63114-2029—USA

Ph. (314) 426-2700 Fax (314) 426-1337

www.code3pse.com

Code 3 is a registered trademark of Public Safety Equipment, Inc.

3M is a registered trademark of 3M Company, Inc.

Revision 4, 5/02 - Instruction Book Part N0 T06581

©2002 Public Safety Equipment, Inc. Printed in USA

WARRANTY

This product was tested and found to be operational at the time of manufacture. Provided this product

is installed and operated in accordance with the manufacturer's recommendations, Public Safety Equipment

guarantees all parts and components except the lamps for a period of 1 year from the date of purchase or

delivery, whichever is later. Units demonstrated to be defective within the warranty period will be repaired or

replaced by the factory or at a factory authorized service center at no cost.

Use of a lamp or other electrical load of a wattage higher than installed or recommended by the factory

causes this warranty to become void. Failure or destruction of the product resulting from abuse or unusual

use and/or accidents is not covered by this warranty.

PSE shall in no way be liable for other damages including consequential, indirect or special damages

whether loss is due to negligence or breach of warranty.

PSE MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY INCLUDING, WITHOUT LIMITATION,

WARRANTIES OF FITNESS OR MERCHANTABILITY, WITH RESPECT TO THIS PRODUCT.

PRODUCT RETURNS

In order to provide you with faster service, if you are going to return a product for repair or replace-

ment*, please contact our factory to obtain a Return Goods Authorization Number (RGA number) before you

ship the product to PSE. Write the RGA number clearly on the package near the mailing label. Be sure you

use sufficient packing materials to avoid damage to the product being returned while in transit.

*PSE reserves the right to repair or replace product at its discretion. PSE assumes no responsibility or liability for

expenses incurred for the removal and/or reinstallation of products requiring service and/or repair.