Code 3 NarrowStik - Manual (Page 8)

8
Maintenance
The NarrowStik ™ and LC-Stik require minimal routine maintenance. Occasional cleaning of the lens is all that is
required to sustain maximum light output. Water or Code 3® lens polish and a very soft cloth is needed for cleaning.
The plastic scratches easily, so cleaning is recommended only when necessary. The lens should not be removed
at any time.
Parts List
Name Type Part Number
LED Lightheads Narrowstik Contact Code 3 for Replacements
LC-Stik Amber T07090
LC-Stik Red/Amber T07549
LC-Stik Blue/Amber T07550
Chassis Extrusion 39" T07964
47" T07965
Cable 22' Narrowstik T09695
LC-Stik T13195
Endcap T09502
Troubleshooting
Verify that all connections for the Narrowstik / LC-Stik are correct as detailed in this manual. Each
head can be checked by placing POWER on the red and red/white wires while grounding each
individual LED control wire (see figure 5, page 5).If any heads do not light replace with a new L.E.D.
module or return the entire unit for service. If all heads are functioning refer to the control head
manual for troubleshooting details related to the control head. Refer to the back page of this manual
for service information.