Code 3 NarrowStik - Manual (Page 6)

6
It may be necessary to retrofit the new 11-wire cable to a 5 output control system. The required connections
are shown below, in Fig. 6, to connect a 5 output control head or a 5 output RLS. Stand alone LED Narrowstiks
and internal Lightbar LED Narrowstiks will follow the same wire designations. Refer to the 5 output control
head user manual, or RLS manual, for control head operation.
Connecting An 11-wire LED Narrowstik cable
to a 5 Output Control Head or RLS System
Fig. 1
RED, RED/WHITE Power (+12V) wires
WHITE
LED DIM Control
BROWN
ORANGE
TAN
Individual
VIOLET LED Control
Wires
GREEN
GREY
YELLOW
BLUE
New Standard 11-Wire Cable Designations
As shown, the Orange and Tan, Violet and Green, and the Grey and Yellow wires will need to be paired
into each single output as indicated. Note that the each wire shown with two color designations is
actually representing two individual wires into a single output.
RED, RED/WHITE Power (+12V)wires
BROWN
ORANGE
Individual LED control
VIOLET Wires
YELLOW
BLUE
Existing 7-Wire Cable
Designations
NASLDC, 5 Output Control Head Connections
RLS 5 Output Connections