Code 3 LED X Exterior Light - Manual (Page 6)

Figure 3 LXEX2F
Dual Exterior LED Module (LXEX2, LXEX73P, LXEX64P):
This unit can be mounted to metal surfaces using #8 x 1/2 pan head sheet metal screws
(included). This unit can also be mounted to plastic surfaces using #8 x 1/2 pan head
machine screws (included). Two additional 0.25" minimum diameter, or (1) .500" minimum
diameter mounting holes are drilled as shown in Figure below. An optional mounting rubber
gasket, included with the unit, may be used to prevent oxidization and galvanization of the
mounting surface due to metal-on-metal contact.
Figure 4 LXEX73P
Figure 5 LXEX64P
6