BoonDocker POLARIS RZR XP 900 Turbo System - Manual (Page 9)

Revised 7/9/2013 Page 9 of 17
www.boondockers.com………………..... ……….………………....877-522-7805
37. INSTALL TURBO OUTLET Fasten the
turbo outlet to the turbo using the 8mm x 30mm
allen head bolts. 38. INSTALL MUFFLER Remove the bed
support bracket on the passanger side of the
vehicle.
39. Install the bed support bracket replacement. 40. Remove the 2 passenger side tie down
support brackets from the inside of the bed.
41. Pry the bed off of the mounting bracket and
slide the muffler mounting tabs in between the
bed and the bed mounting bracket. Loosen
addition bed bolts if needed. 42. Align the muffler to the turbo inlet, outlet
and tie down support bracket holes. Reinstall the
support brackets and fasten the muffler to the
outlet using the 2 provided gold springs.