BoonDocker POLARIS RZR XP 900 Turbo System - Manual (Page 6)

Revised 7/9/2013 Page 6 of 17
www.boondockers.com………………..... ……….………………....877-522-7805
19. Rotate the 90 degree bend coming from the
thermostat toward the rear of the machine. 20. Route the 15” water line from the inside of
the turbo to the 90 degree coming from the
thermostat.
21. Trim line as needed, then install the 3/8”
barbed union and fasten with 2 #6 hose clamps. 22. Route the 24” water line to the outside of the
turbo to the open end of the coolant line cut in
step 18.
23. Trim line as needed and fasten this
connection with the 3/8” barbed union and (2)#6
hose clamps. 24.INSTALLING OIL DRAIN LINE Locate
the oil drain line and fasten the 5/8” side of the
hose to the turbo oil drain using a #12 hose
clamp.