BoonDocker KTM XC-W: 450/500 - Manual (Page 5)

Revised 12/20/2013 Page 5 of 5
www.boondockers.com………………..... ……….………………....877-522-7805
19. Zip tie wire harness, lines and adapters away
from intercooler. Tighten all hose clamps and
zip tie boost line ends. 20. Install inlet and air filter, position as shown
then clamp down.
21. Mount control box to the center of the
Handlebars with Velcro. 22. Undo oil feed line. Start bike and check to
make sure oil is feeding the turbo. Run the line
into a oil container. Then put back on & tighten
line.
23. Install the tank, side panels and seat. 24.