CDI Torque MULTITEST Motorized Loader - Manual (Page 98)

A-2
Accessories
Motorized Control System Components and Inventory Control
Component Description Drawer-Cutout
2000-100-02 ¬ Roll cabinet
2000-100-2 Foam insert 6
2000-100-3 Foam insert 7
2000-100-4 Foam insert 8
2000-100-5 Foam insert 9
2000-100-7 Foam insert 3
2000-100-8 Foam insert 4
2000-800-02 Motorized torque loader
2000-810-0 Loader
2000-56-0 Plexiglass safety shield
2000-111-0 Indicator stand
2000-810-60 Power amplifier
2000-810-50 Motorized control box
2000-810-22 Gearmotor
9800-303 Loader to Power amp box cable
2000-50-1 Indicator to Motor control box cable
9502-500 Power amp box to Motor control box cable
2000-173-1 Reaction pin assembly 8-C
2000-173-2 Reaction pin assembly 8-C
S/343-50-2 Standoff fixture 9-A
S/2000-173-11 (2) Linear ball bearing
2000-173-6 Reaction ball handle adaptor 8-B
100ST-I Torque wrench (Set to 75 ft. lb.) 7-D
RYE-12 3/4" Open end adaptor 7-B
RYD-6 3/8" Interchangeable ratchet head 7-C
FA12E - 3/8" x 3/8" Hex driver bit 7-C
2000-114 110VAC Power cord 3-D
2000-195-12 Quick Release (2) 8-I
2000-810-01 Digital torque/force/angle indicator kit
2700-110-02M Indicator with printer
2000-114 110VAC Power cord 3-F
2000-900-120 Cable, Indicator to transducers 3-B
¬
The 2000-100-02 roll cabinet is fitted with 1" thick foam inserts for
storage and effective tool control. Storage space is also available
for calibration hangers, torque arms and small weights.
- Used for calibration plate and internal drive plate installation on the
2000-13-02 and 2000-14-02 transducers. Item is not available from
Consolidated Devices, Inc.