Catler BL 8011 - Manual (Page 12)

11
ASSEMBLING AND OPERATING YOUR BLENDER BL 8011
PULSE Function
For ingredients that require short bursts of
power, select the ‘PULSE’ function. The ‘PULSE’
button will illuminate and remain illuminated
while the button is depressed. When this
function is selected, the LCD timer screen
will illuminate and count upwards in one
second increments during pulsing. Press the
‘PULSE’ button in short bursts until blending
is complete.
NOTE:
Use the ‘PULSE’ button when the food
that is being processed is too thick or
coarse to circulate within the blender
jug.
Completion of mixing
At the end of use, always ensure the blender
is turned off by pressing the ‘Power’
button on the control panel. Then switch the
appliance off at the power outlet and unplug
the cord. Ensure the motor and blades have
completely stopped before attempting to
move the appliance, or when the blender
is not in use and before disassembling,
cleaning and storing.
NOTE:
•
During the blending process,
ingredients may stick to the
sides of the blender jug. To push
the food back onto the blades,
press the ‘Power’ button on
the control panel and switch off
at the power outlet and remove
the power cord. Remove the lid
and use a plastic spatula to scrape
down the sides of the jug. Replace
the lid before recommencing
blending.
• If any moisture or liquid appears
on top of the motor base during
blending, press the ‘Power’
button on the control panel,
switch off at the power outlet and
remove the power plug. Remove
the blender jug. Wipe the motor
base immediately with a dry cloth
or paper toweling to absorb the
liquid. Check the blender jug is
correctly assembled.
• Never place anything other than
food and liquids in the blender
whilst the motor is running.