Catler TM 8010 User Manual

Page 16

OPERATING YOUR TEA MAKER TM 8010

NOTE:
The ‚BREW TIME‘ can be adjusted during
the heating process but ‚BREW TEMP‘
cannot be changed once the heating
cycle commences.
To change the brew time press the right

ARROW UP button to increase the

time, or the right

ARROW DOWN

button to decrease the time. The brew-
ing time can be adjusted in 30 second
increments up to a maximum of 10 min-
utes.
To change the brew temperature, press
the TEA|Cancel button to cancel the
heating cycle. Re-select the brew tem-
perature (see Page 15 and 18).

9. Once the selected brew temperature is

reached the assembled Basket will automa-
tically lower into the heated water.

10. Once the Basket reaches the bottom of the

Glass Jug, the LCD screen will indicate the
brewing progress, automatically counting
down in one second increments. This is dis-
played as the right fi gure on the LCD screen.

11. At the end of the tea brewing cycle, the Bas-

ket will automatically rise to the top of the
Glass Jug to prevent over-brewing. The tea
alert will sound three times.

WARNING:

THE TEA BASKET IS HOT TO TOUCH
AFTER TEA IS BREWED.

ENSURE THE TEA BASKET HANDLE HAS
COOLED BEFORE HANDLING.

Selecting the ‚Keep Warm‘ Feature

This feature allows the brewed tea or heated
water to remain warm for up to 60 minutes.
The ‚Keep Warm‘ temperature ranges between
70-80°C depending on the original brew tem-
perature selected.
The lower the brew temperature, the lower the
‚Keep Warm‘ temperature.

Original Brew Temp.

Approximate Keep

Warm Temp.

70°C - 80°C

70°C

85°C

75°C

90 - 100°C

80°C

NOTE:
During the ‚Keep Warm‘ cycle, brewed
tea will continue to develop flavour.
Depending on how long you intend
to keep the brewed tea warm, you
may consider reducing the initial tea
strength / brew time (see Page 15 and
21).

To activate the ‚Keep Warm‘ feature:
1. Press the KEEP WARM button before, during

or after completion of the tea brewing or
water heating cycle.

The button surround will illuminate, indicating
the ‚Keep Warm‘ feature has been selected.