Catler TM 8010 - Manual (Page 14)

14
OPERATING YOUR TEA MAKER TM 8010
Use as a Tea Maker for Brewing Tea
1. Remove the Glass Jug from the Power Base
and remove Jug Lid. When brewing tea, fill
with desired amount of water. Ensure you do
not fill past the tea maximum mark (1200 ml
TEA MAX).
WARNING:
FILLING PAST THE ‚MAX‘ LINE MAY RE-
SULT IN SERIOUS BURNS OR INJURIES
AS A RESULT OF OVERFLOWING HOT
OR BOILING WATER. FILLING BELOW
THE ‚MIN‘ LINE WILL RESULT IN THE TEA
MAKER SWITCHING OFF BEFORE THE
WATER HAS BOILED OR REACHED THE
SELECTED TEMPERATURE.
2. Place the Basket on a flat, dry surface.
Remove Basket Lid by lifting from the sides.
3. Use the provided Tea Scoop to fill the Bas-
ket with tea leaves. As a general guide, use
1 scoop of tea leaves per cup / 250ml of wa-
ter, however this will depend on the instruc-
tions on tea packaging and your personal
preference (See Page 11, Water to Tea Scoop
Ratio).
4. Replace the Basket Lid on top of the Basket.
Ensure lid is securely snapped in place by
pressing firmly on the centre of the lid.
5. Slide the assembled Basket on to the mag-
netic post located within the Glass Jug. The
assembled Basket will attach itself to the top
of the magnetic post. Replace Jug Lid.
OPERATING YOUR TEA MAKER TM 8010