CASO Germany MR3X ACID ETCHED Grater - Manual (Page 31)

caso MR3X Acid Etched 31
14.2 Assembly/Usage instructions
Select the drum that will be used and insert it into the chute
opening. The exterior metal portions of the drums are sharp.
Handle them carefully. Insert drum into food chamber.
Warning
Personal and property damages can occur during
commissioning of or handling the device!
► Observe the following safety notices to avoid such
dangers:
► Drums are sharp. Handle them carefully.
Attach the food chamber assembly to the housing base. With
the handle in your right hand and holding the food chamber at
a 15° angle, aline the food chamber with the corresponding
shaft recess on the housing base. The driving end of the
assembly must be fully inserted into the socket of the
motorized base. Next, while pushing the food chamber
assembly firmly in toward the handle, rotate the assembly
counterclockwise until it is upright and it is centered with the
handle.
Warning
Personal and property damages can occur during
commissioning of or handling the device!
► Observe the following safety notices to avoid such
dangers:
► Make sure appliance is off when not in use, before
putting on or taking off parts.
14.3 Safety equipment
Safety switches prevent the machine from operating when the drum and feed tube are not
locked into position.
The motor stops within seconds when the motor is turned off.
14.4 Rating plate
The rating plate with the connection and performance data can be founded on the back of
the device.