CASO Germany M 20 electronic - Manual (Page 49)

caso M20 electronic (pure white) 49
11.9 Setting the clock
To set the clock on the device, proceed as follows:

Activating setup mode
Press the button Time.
Press the button once again to switch the oven from the 24 hour system to
the 12 hour system.

Setting the hours
Turn the control dial Time/Weight until the correct hour is
displayed.
Press the Time button to save the set hour.

Setting the minutes
Turn the control dial Time/Weight until the correct minute is displayed.
Press the Time button to save the set time.
11.10 “Microwave” mode
With microwave cooking, you can adapt the power level and cooking time.
 Setting the power level
Select the power level you want by pressing the Power/Sound button until
you reach the level you require (see following table).
 Setting the cooking time
Set the cooking time by turning the Time/Weight control dial.
 Starting the cooking programme
After selecting the program, press the button Start/Quickstart, to start the
preset cooking programme.
 End of the cooking programme
Once the end of the cooking time is reached, three signal tones will be emitted and END
will appear in the display.
Display Watt Power level
P800 800 100%
High / cooking and broiling
P640 640 80%
P480 480 60% Medium high / Cooking of small quantities
P320 320 40% Medium / simmering
P160 160 20% Medium low / Defrost
P0 Low / Keeping warm