Salter Brecknell RD Series - Manual (Page 3)

The RD Series Remote Displays currently consist of two size LED displays:
RD-2 2 1/2” High LED display
RD-4 4” High LED display
The RD Series Remote displays are housed in a NEMA 4X stainless steel enclosure. A wall
mount bracket and sun-shade are standard.
SETUP
Setup is very easy and can be configured automatically or manually.
1. Automatic setup – RS-232
Set the output from your digital indicator to continuous and have one of the following serial
protocols set in the indicator:
BAUD RATE BITS/PARITY BITS/PARITY
1200 8, N 7, Odd or even
2400 8, N 7, Odd or even
4800 8, N 7, Odd or even
9600 8, N 7, Odd or even
19200 8, N 7, Odd or even
Remove the back cover. Connect the serial cable to terminal J2.
For 4” remote display insert jumpers on JP1 & JP2. Leave JP3, JP4 and JP5 open.
For 2.5” remote display insert jumpers on JP1 & JP2. Leave JP3, JP4, JP5 and JP6 open.
RD-4 -4” remote RS232 connections