Salter Brecknell BFS-150 - Manual (Page 5)

Initial set up:
BODY FAT, BODY WATER, BMI, KCAL, MUSCLE, BONE MONITOR OPERATION.
1) Choose a memory number (from P-00 to P-12)
Press “on/set” to start the setting mode, press “up” or
“down” to choose a number, then press “on/set” to
confirm setting. The LCD will prompt to next
parameter setting “Gender” at the same time.
2) Input gender
Press “up” or “down” to choose gender, then press
“on/set” to confirm setting. The LCD will prompt to the
next parameter setting “height” at the same time.
3) Input height
Press “up” or “down” to choose height, then press
“on/set” to confirm setting. The LCD will prompt to the
next parameter setting “Age” at the same time.
4) Input age
Press “up” or “down” to choose age, then press
“on/set” to confirm setting. The LCD will prompt to
next parameter setting “Athlete Mode” at the same
time.
5) Select ATHLETE MODE
Press “up” or “down” to choose from the list of
options, then press “on/set” to confirm setting. The
LCD will prompt to next parameter setting memory
number.
6) Exit
Press “START” button to exit setting mode and enter
normal monitor operation.
1) Press “on/set” to start, press “up” or “down” to choose
a memory number, then press “START” button to save
and exit set up mode.
2) When LCD displays “0.0kg” you can step onto the
scale (ensure to remove your socks and shoes). Align
your feet to the metal electrodes, two for each foot.
Ensure your feet are shoulder width apart and not
touching each other (to avoid inaccurate reading) if you
step on the scale too late the LCD will Auto-off. Simply
press the on/set button again, the LCD will show your
current setting, then press the “START” button again to
enter normal monitor operation mode.