Salter Brecknell HS-200M - Manual (Page 3)

3
1. Lay the pillar on a table (Fig.3)
2. Disassemble the wires on the levers.
3. Insert the wrench to the small hole in front of the steelyard rod, and pull the
hook of steelyard rod with the hook of wrench (Fig. 3-1)
4. Push the long lever frontward, then hook the bearing of the steelyard rod on the
pivot of the long lever (Fig. 3-2)
5. Take away the wrench form the draft rod (Fig.3-3)
6. Put the scale on ground gently
III. Height rod Installation (Fig.4):