Salter Brecknell 6712 - Manual (Page 8)

Model 6712 Point-of-Sale Interface Scale User’s Manual 8
After the NCI Model 6712 is properly installed
and power is applied, the display will perform a
countdown test to insure all display segments are
functional.
After this test is completed, the display should
show zero (0.0).
If the display indicates a slightly “off” zero condi-
tion (either a number in the display or dashes at
the bottom of the display), press the ZERO key.
When the display shows 0.0, it is ready to weigh.
Place item or parcel on the weigh platter and the
weight will be displayed. This information can be
transmitted when requested by a remote device.
Operation
Operating Instructions
6712 Remote Display