Salter Brecknell PS400 - Manual (Page 9)

PS150 and PS400 User Instructions 7
1.9 Mounting the Indicator
1. Mount bracket to wall using (2) screws that are appropriate anchors for the
surface being mounted to.
2. Lower control panel into mounted bracket. Insert flat tip screws (included)
through round holes in mounting bracket and drive the screws into existing
threaded holes in lower half of control panel to secure control panel to bracket.
1.10 Routine Maintenance
Always turn off the machine and isolate from the power supply before starting any
routine maintenance to avoid the possibility of electric shock.
1.11 Sharp Objects
Do not use sharp objects such as screwdrivers or long fingernails to operate the keys.
IMPORTANT: This equipment must be routinely checked for proper operation
and calibration.
Application and usage will determine the frequency of calibration required for
safe operation.