7 battery installation, 8 auto shut-off feature, Battery installation auto shut-off feature – Salter Brecknell PS400 User Manual
Page 8
6
PS150 and PS400 User Instructions
1.7 Battery Installation
The Digital Receiving Scale operates with (6) "AA" batteries (Alkaline preferred).
1.
Place unit upright on a flat surface and lift platform from top of scale.
2.
Remove battery compartment door and insert batteries into compartment.
Make certain to observe the correct polarity.
3.
Replace compartment door and platform cover on scale.
1.8 Auto Shut-off Feature
This feature makes the scale shut-off after 2 minutes of nonuse to conserve the battery.
You can disable this feature and the scale will operate continuously.
1.
With the scale off, press the [UNITS] button and hold down.
2.
Press and hold [ON] button, while holding the [UNITS] button down.
3.
The display will show "
8888 " and then "A_of " will appear. The auto-off
feature is now de-activated. Release the buttons.
4.
To make the auto-off active again, repeat step 1 and 2 and "
A_on " will
appear. The auto-off is now functional.