4 error and status messages, 1 low battery, 2 over load – Salter Brecknell PS400 User Manual
Page 13: 3 minus weight, 4 eprom failure, Error and status messages, Low battery over load minus weight eprom failure
PS150 and PS400 User Instructions
11
2.4 Error and Status Messages
2.4.1 Low Battery
If battery is discharged, the display will show the"
bAtt" message. The operator
should replace the batteries.
2.4.2 Over Load
If the total load exceeds the maximum capacity of scale, the display will show the "
oooo
"
message. The weight must be removed from the platform and not allowed to remain on
the platform.
2.4.3 Minus Weight
If the weight value is less than -99.9 lbs, the display will show the following: "----".To
adjust the minus weight, press the [HOLD] button.
2.4.4 EPROM Failure
If the "
ErrE" message appears, the operator should contact their scale service
representative.
batt
oooo
----
ErrE
This manual is related to the following products: