Salter Brecknell B225 - Manual (Page 34)

6 Management mode
34 B225 User instructions
Parity
Half / full duplex
Printer configuration - Branch 38
Select printer type
Baud rate
Value (* = Default)
0*
None (Eight data bits)
1 Even
2 Odd
Sets the RTS/CTS handshaking protocols.
Value (* = Default)
0*
Full duplex mode - no RTS/CTS handshaking
1 Remote user interface setting - Half duplex operation - RTS
line set high when transmitting - else low (remote user use
with RS485 interface)
2 Half duplex operation - RTS line set low when transmitting -
else high (remote user use with RS485 interface)
3 RTS low, CTS ignore
4 RTS high, CTS ignore
5 RTS raise, CTS wait
6 RTS raise, CTS ignore
7 RTS low, CTS wait
8 RTS high, CTS wait
Select the print format.
Value (* = Default)
35
PC protocol. See PC
protocol on
page 38 .
40* IMP
41 DYMO
42 ZEBRA. See notes on
page 37 .
3 6 . 0 3
3 6 . 0 4
3 8 . 0 0