Salter Brecknell B225 - Manual (Page 23)

5 Operation
B225 User instructions 23
Sleep mode
Reset
The scale has a power save (sleep) mode. This can be activated either
after a set period of inactivity (see
page 30 ), or manually at any time.
To put the scale into sleep mode:
1. Remove all weight from the scale, then press and hold the reset key.
To exit sleep mode:
1. With no weight on the scale, press the reset key.
Note:
On dual platform systems the scale will revert to the integral weighpan
(base 1).
If the scale is not configured to use sleep mode (see page 31 ), the reset
key can be used to activate a scale reset.
To reset the scale:
1. Remove all weight from the scale, then press and hold the reset key.
Note:
On dual platform systems the scale will revert to the integral weighpan
(base 1).
sleep
Press and hold until double beep
0.000
Press and hold until double beep
-88888
8888888
88888888