Salter Brecknell C3235 - Manual (Page 5)

5
5.0 Checkweighing
1. Power up the scale.
2. Zero the scale if necessary by pressing the ZERO key…
0 is displayed.
3. Place the item to be checkweighed on the scale platform.
The weight is displayed and the Over, Accept or Under
annunciator lights. You must set the acceptable window
parameters in the Configuration menu which is described in
rAnGE on page 6 .
4. Remove item from the scale platform and repeat steps 3 and 4 for
each item to be checkweighed.
6.0 Configuration Menu
The Configuration menu is shown in Figure 1.2 .
Figure 1.2 Configuration menu