0 gross weighing, 0 tare weighing, Removing a tare – Salter Brecknell C3235 User Manual
Page 4
4
The steps for various kinds of weighing are explained in the following
pages. To set parameters and calibrate the unit, see
Configuration Menu and Setting Parameters on page 6
.
3.0
Gross Weighing
1.
Power up the scale.
2.
Zero the scale if necessary by pressing the ZERO key…
0 is displayed.
3.
Place the item(s) on the scale platform.
4.
Remove the item(s) and repeat steps 2 through 4 for the next
item(s).
4.0
Tare weighing
1.
Power up the scale.
2.
Zero the scale if necessary by pressing the ZERO key…
0 is displayed.
3.
Place the item to be tared on the scale platform.
4.
Press the TARE key…
0 weight is displayed and the TARE annunciator lights.
5.
Place the item to be weighed on the scale platform…
Net weight of the item is displayed.
6.
Remove the item and repeat steps 2 through 5 for other items.
Removing a Tare
Take everything off the scale and press the TARE key…
0 is displayed and the TARE annunciator turns off.