Salter Brecknell C3235 - Manual (Page 8)

8
2. Remove the item from the scale and repeat steps 1 and 2.
Units
Use the Units menu item to set the unit of measure to Lbs, Kgs or Grams.
You can also choose to set the scale to the counting function. Follow these
steps to set the Units item.
1. Press and hold the F key for three seconds to access the
Configuration menu …
If the unit is not in the counting mode, rAnGE is displayed. If the
unit is in the counting mode the display will show Units and you
can skip to step 3 below.
2. Press the F key…
Units is displayed.
3. Press the TARE key…
The current unit of measure or PcS is displayed.
4. Press the F key to scroll through the choices:
Lb.Lb This is the pounds unit of measure.
Lb.oZ This is the pounds/ounce unit of measure.
PcS This is the counting function.
HG This stands for KG or kilogram
G This is the gram unit of measure.
5. When your choice is displayed, press the TARE key…
If you choose a unit of measure the scale returns to normal
weighing mode with that unit of measure active and its
annunciator lit.
If you choose PcS, the scale shows Zt-oFF . This stands for Zero
Tracking Off. Press the F key to toggle between Zt-oFF and Zt-on.
Press the TARE key to accept the displayed choice. For small
piece weights it is a good idea to leave the Zero Tracking off.
When you’ve made your selection, the scale is in counting mode
with the Count annunciator lit. Follow the steps in the next section
to use the scale as a counting scale: