Salter Brecknell C3235 - Manual (Page 2)

2
Keys and Annunciators
Display Messages
dc x.xx This is the voltage of the battery in volts.
------ This is displayed and a beep sounds when the scale is
overloaded. A weight more than 9 divisions over capacity is
an overload condition.
-BATLo- This is displayed when the battery voltage is low. You can use
the scale for a while, but must recharge the battery soon.
CAEnd This is displayed when calibration is finished.
Err-0 A zero point error has occurred.
C_End This is displayed when the battery is fully recharged.
ZERO key. Press this key to turn the scale on
and zero the display.
TARE key. Press this key to tare the weight
on the scale. Also accepts the displayed item
in the menu structure or during numeric entry.
OFF key. Press this key to turn the scale off.
F key. Use this key to access the
Configuration menu. Also used in the menu to
move between choices.