Chapter 5 using the playback function, Chapter 5, Using the playback function – AVer iMatrix User Manual
Page 20

17
Chapter 5 Using the Playback Function
User can playback recorded video from the remote side of the DVR server.
i
- Playback function must be enabled. Please go to Setup > Camera and select the
monitor set and enable the playback function ( see also
)
- iMatrix playback doesn’t support on EB series.
1.
Double-click the preview icon of channel and the channel will start playback.
i
The
icon indicates the channel is in playback status.
2.
User can use the playback control button to operate the playback.
i
-
Click channel to switch to full screen mode for operating playback control button
easily.
-
iMatrix only supports 4 channel playback at the same time.
Button
Function
Begin: Move at the beginning of video.
Slower: Play the recorded video file at the speed of 1/2X, 1/4X, 1/8X,
1/16X, or 1/32X.
Pause: Briefly stop playing
Play: Play the video
Next: Go to the next frame.
Faster: Play the recorded video file at the speed of 2x, 4x, 8x, 16x or 32x.
End: Go to the end of the video.