AVer SF1311H-D - Manual (Page 10)

6
Hardware Installation
1. Please select the most suitable position on the wall or ceiling to install the camera.
2. Rotate the dome housing counterclockwise to remove it from the mounting base.
3. Set the mounting base onto the wall or ceiling and center it over the mounting hole, using the
two retaining screws for the main body, supplied by the appurtenance bag.
4. For lens adjustment, move the camera body (some model type limits the PCB board
to180°rotational adjustment) and set the focus by turning the lens to the left or right direction.
When the camera focus adjustment has been completed, rotate the dome housing
clockwise to secure it to the mounting base
5. Connect
the LAN cable to Ethernet‟s switch or hub and the DC-Jack to the power source. And
connect the other cables and connectors if necessary.