AVer Data BOX - Manual (Page 5)

5
Setting DVR POS Configuration
To set the NV/SA DVR POS setting:
1. Run the NV/SA DVR program.
2. In the Preview/Advanced screen mode, click .
3. When the NV/SA DVR configuration setup selection appears, click System.
4. In the System Setting dialog box, POS section, click Setting.
5. In the POS Console Setting dialog box, click Add to set a new POS setting, Modify to change
the POS setting, and Delete to remove the selected POS setting. Click Exit to close POS
Console Setting.