AVer IWH3216 Touch3216 Touch II quick guide - Manual (Page 14)

12
Name Function
(2) Split Screen
Mode
It provides 6 kinds of split display modes for your selection. You can
select one of the split display modes by clicking the icon.
i
- If there are only 4 cameras enabled
, you won’t be able to switch to 9, 13 and, 16 split
screen mode.
- The DVR system will save the current operating mode (split screen mode, auto scan,
and compact mode status) when shutdown DVR application and apply the mode for
next login.
- When you are in single screen mode, Right click and Drag a square on the area you
want to enlarge.
- When you are in multiple-screen mode, Right click the video screen of the camera
and Drag on where you want to relocate it. To only display one of the video in the
multiple-screen mode, Left click on the video screen you only want to display.
(3) Status Bar
It shows the current time, system temperature, and the hard disk’s free
space.
(4) Record
To start recording. The button turns violet when it is recording. Click it
again and enter the password to stop.
(5) E-Map To load up to 8 desired E-Maps in BMP or JPG image format, and locate
cameras, sensors, and relays to desired positions.
(6) Network To allow inbound connections. When this function is enabled, the button
turns violet. Click it again to disable all inbound connections.
(7) Setup When s etting up the system for the first time, type the word “admin” in
the Password text box to access.
Click Setup ( ) button to configure settings for cameras, recording,
network, scheduler, backup, sensors, relays, alarms and user
authentication.
(8) PTZ To call out a PTZ setup dialog to configure an appointed PTZ camera.
(9) Preview Switch to Preview/Advanced mode. This allows you to view live camera
display. Press ctrl + F can freeze the live preview video screen. And
then, click Snapshot can save the freeze video screen.
(10) Playback Switch to Playback mode. This allows you to view the recorded video file.