AVer IWH3216 Touch3216 Touch II quick guide - Manual (Page 10)

8
III. Operating the DVR System
Running the Unit for the First Time
When the unit is turned on for the first time, the system will prompt you to enter the CD-Key. After
enter the CD-Key, the DVR will enter Preview Mode interface.
To Connect the Camera
Before to monitor, user needs to connect the camera to get the live video. Please follow the below
steps to connect the camera.
Analog Camera
1. Plug the video cable to video connector of the DVR unit (for IWH3216 Touch only).
2. Connect video cable of camera to DVR unit (BNC port or connector of video cable). The video
will display on the channel that camera is connected.
IP Camera
1. In Preview mode, click Setup button ( ) and select Camera.
2. In Camera setting window, select the channel that camera will be connected.
3. And then, select the IP Camera as Input.
4. The IP camera detail window will show up. Select the way to connect the IP camera
– Protocol
or URL. And then, enter or select all required data. Using Search Devices button can help user
to find all available IP cameras on your local network. If camera require authentication for
accessing, mark Authentication check box and enter the ID and Password of IP camera.
Click to select
the channel