AVer CM5000 - Manual (Page 132)

125
Name Function
Reset
To reset the zoom back to the center of screen view in
default value (1x).
 Setup Camera PTZ function
Setup IP PTZ
User can enable PTZ function if the IP camera has supported.
1. In setup mode, select the NVR/DVR server. Then, click  of Camera setting to expand the
camera list.
2. Then, select Camera # > PTZ tab. In PTZ page, click Use PTZ to enable PTZ function.
3. Mark User PTZ check box to enable PTZ function.
4. Preset Setting: use the control panel to adjust the position of the camera and select the
Preset Number to assign a number for the camera current position. After is done, click
Save to keep the settings.