AVer CM5000 - Manual (Page 112)

105
 Protocol: Enter the brand name of the IP camera. For example: AVer, AXIS...etc.
 Model: Enter the model type of the IP camera. For example: FD2000
 User Name: The user name of IP camera for authentication when connect to the IP
camera.
 Password: The password of IP camera for authentication when connect to the IP
camera.
 Add to Camera: The channel that is going to connect the IP camera.
8. To configure the IP camera ’s detail setting, please refer to the chapter of Configuring the
IP camera.
9. To connect another IP camera, repeat the above steps.