AVer CM3000 for E5016 - Manual (Page 28)

23
In the Monitor screen, user can right-click and drag the camera to the hotspot channel for
enlarge viewing.
 Sequence: Set the selected channel to automatically switch to display all camera channels
in cycle.
 Matrix: set the selected channel to receive and display the alarm event from selected DVR
servers. Click Setup to select the DVR servers. Enable the Retrieve time to set a period
time (0 ~ 255 sec) for alarm event to display. If the retrieve time does
n’t enable, the alarm
event will display on screen until next alarm event come in.
i On the DVR site, user need to enable and configure the matrix to send to CMS
(please refer to Alarm Setting of NV/SA user’s manual).