AVer H300 quick guide - Manual (Page 4)

Remote Control
The remote control requires two (2) “AAA” size batteries (supplied), make sure batteries are
installed properly before using. Aim the remote control to the AVer H-Series camera
infrared sensor to operate the unit.
Name Function
(1) Call Start a call or add another party.
(2) Phone Book  Search contact to make a call.
 Enter to add, edit, delete or create group
contact entry.
(3)  Enter  Make a selection in OSD menus or on-
screen keyboard.

Accept incoming call.

Display the site name and icon during the
meeting.
(4) ▲,▼,◄, & ► 
Use these buttons to navigate through the
selections in OSD menus or on-screen
keyboard.

Pan the zoomed in camera image or the
captured image.
 Move around within the zoomed in camera
image or the captured image.
(5) Present Share either the video/image from the VGA IN
port or the captured image.
This present icon will appear on the
screen to indicate sharing the present image.
The present icon will disappear in 5 sec.
(6) Vol +/- Increase/decrease the speaker volume.
(7) Zoom +/- Zoom in/out the camera image or the captured
image.
(8) Mute
Turn on/off the MIC. This mute icon will
appear when the mic is turned off. The mute
icon will become translucent in 5 sec.
(9) Preset  Press hold for 3 sec to set the position of the
camera preset point from the selected number.
The preset point can be set from 0-9.
 Press to move the camera target to the
selected preset point number.
(4 )
(8 )
(3 )
(5 )
(23)
(22)
(12)
(10)
(17)
(16) (2 )
(1 )
(18)
(19)
(20)
(14)
(6 )
(7 )
(9 )
(15)
(13)
(11)
(21)