AVer 300AF user manual - Manual (Page 25)

E-19
English
繁體中文
簡體中文
日本語
ภาษ
าไทย
OSD Menu Description
EFFECT
B/W
NEGATIVE
MIRROR
ROTATE
COLOR
EFFECT
Use ▲or▼ buttons to display the image
captured by the camera into negative, positive
(true color), monochrome (black and white),
mirrored image, or as a rotated image by 180º.
DEFAULT
NO
YES
DEFAULT
Use ▲or▼ buttons to select YES to restore to
original factory default setting or NO to exit.
Press ► to make the selection.
AUTO
MANUAL
FLICKER
NIGHT VIEW
EXPOSURE
MANUAL
0 38 54
EXPOSURE
Use ▲or▼ buttons to select between Auto and
Manual.
AVerVision300AF enables you to automatically
or manually adjust the camera to determine how
much light is required.
If you choose to manually adjust the exposure,
press ►or◄ buttons to adjust the exposure
level.
If you are presenting in a low-light condition,
Night View enables the image of the object to
appear as though under normal lighting
conditions. The AVerVision300AF automatically
adjusts the exposure to compensate for the
adverse condition, but the captured image will
appear to be in low frame rate.
FLICKER
50 Hz
60 Hz
FLICKER
Use ▲or▼ buttons to select between 50Hz or
60Hz. Some display devices cannot handle high
refresh rates. The image will flicker a couple of
times as the output is switched to another
refresh rate.
WHITE BALANCE
AUTO
MANUAL
WHITE BALANCE
Use ▲or▼ buttons to select between Auto and
Manual.
AVerVision300AF enables you to automatically
or manually adjust the camera to suit the lighting
condition or color temperature. If you select to
manually adjust the white balance, you can
adjust the Red, Blue or use the system to
measure the color temperature.
MANUAL
MEASURE
RED
BLUE
To obtain a more accurate color balance, place a
sheet of white paper under the camera. Select
MEASURE then press ► button to calibrate the
color temperature. Wait until a "MEASURE OK"
appears at the lower left corner of the
presentation screen.