Making the connections, English 繁體中文 簡體中文 日本語 ภาษ าไทย – AVer 300AF user manual User Manual
Page 11
E-5
English
繁體中文
簡體中文
日本語
ภาษ
าไทย
M
M
a
a
k
k
i
i
n
n
g
g
t
t
h
h
e
e
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
s
s
The ports on the back and side panel of the AVerVision300AF enable
you to connect the unit to a computer, graphics display monitor or
LCD/DLP projector, TV or other device. Illustrated below are the ports
that are located at the back and side panel of the AVerVision300AF
with their corresponding labels.
TV R
GB
VID
EO
S-VI
DEO
DVI
(2)(3)
(4)
(5)
(6)(7)
(8)
(1)
(9)
(10)
VGAO
UT
VGAIN
DC12V
LIGHT
BOX
Port
Description
(1) Antitheft Slot
Attach a Kensington compatible security lock or
antitheft device.
(2) DC 12V (input)
Connect the power adapter into this port.
(3) Light Box Port
Plug the optional light box into this port.
(4) VGA IN Port
Input RGB signal from a computer or other
sources and actively pass it through to the VGA
output port only.
Connect this port to the VGA output port of the
computer.
(5) VGA OUT Port
Output RGB signal from the camera, VGA input
port, or the captured images from the memory on
a VGA/Mac monitor or LCD/DLP projector.
(6) TV/RGB Switch
Set to select the between RGB (VGA Out) or TV
(Composite Video/S-Video Out) display output.
(7) VIDEO Port
(RCA/Composite)
Output the signal from the camera or the
captured images from the built-in memory on TV
or video equipment.
(8) S-VIDEO Port
Output the signal from the camera or the
captured images from the memory on TV or
video equipment.
(9) DVI Port
Output video signal from the camera, or the
captured images from the memory on an LCD
monitor or LCD/DLP projector with DVI interface.
(10) USB Port
Use AVerVision300AF as a USB Camera or
Image Download allowing you to transfer the
captured images to and from the
AVerVision300AF built-in memory and PC.