Arc Machines 217 WDR - Manual (Page 9)

M O D E L 2 1 7 W D R
O P E R A T O R ’ S M A N U A L
5
1.3 SYSTEM SYMBOLS
The following symbols are present on the Model 217 WDR:
WARNING: Read this manual! This document contains information
that could help prevent injury or damage to the equipment.
AC main input, 115/230 volts AC, 50/60 Hz.
On / Off switch (CB-1 main circuit breaker).
Input for the arc shielding gas. An external regulator and flow
indicator must be used.
USB port. For importing and exporting weld schedules from an
external storage device. Devices should not be left plugged in while
welding.
Ethernet port. For networking capability. Devices should not be left
plugged in while welding.
Remote control connection.
Weld head electrode and ground connections.
Output for the arc shielding gas connection.
Weld head control. Intended for AMI and EXEL by AMI weld heads
only.