Alumax WA 40 - Manual (Page 15)

6a
INSTRUCTION MANUAL
15
WALL BRACKET BACK PLATE (CONTINUED) 5
6 U-CHANNEL LOCATION
Insert one drop of silicone in each hole bored
in the wall before inserting the wall plugs.
Screw in head screws through holes to
secure back plate of bracket to wall (x2)
5c
5d
Apply double sided VHB tape to the bottom
of the U-channel (12).
Place the u-channel against the wall
jamb and align it to the line marked
previsouly on base.Then press down to
secure to the base.
12
6a
6b
6b
5d 5c
SAME PROCEDURE FOR OPPOSITE SIDE OF WALL
CLEAN BOTTOM OF U-CHANNEL AND BASE
BEFORE APPLYING DOUBLE SIDED VHB TAPE
TO UNDERSIDE OF U-CHANNEL.
Interior
Shower Side