Alumax WA 40 - Manual (Page 14)

5b
INSTRUCTION MANUAL
14
WALL BRACKET BACK PLATE
5
WALL JAMB INSTALLATION (CONTINUED)
4
Add silicone to the exterior bottom edge of
the wall jamb.
Fasten the wall jamb to the wall with 1-1/4”
screws (24) through the previously installed
wall plugs. (x4)
Add silicone to interior bottom edge of the
wall jamb
4h
4i
4j
4h 4i
Align the back plates of the wall
bracket to previously traced mark
lines on the wall. Trace the holes
centers to determine drilling
location (x2). Remove the back
plates.
Drill marked holes in walls by
using the 1/4” drill bit.
5a
5b
INTERIOR
SHOWER SIDE
5a
INTERIOR
SHOWER SIDE
4j
1
INTERIOR
SHOWER SIDE
1
24